How To Use Lancet For Blood Sugar

Blood sugar is something everyone should control. Especially for people with diabetes, this is something that must be done periodically. By knowing the level of sugar in the blood, we can control our food intake so it is not too high or too low. If not controlled it will harm our internal organs. However, have you found out how to check the blood sugar right? Here we will explain the details.

How to Check Sugar In Blood

  1. Prepare the equipment you need, namely: Glucometer, Alcohol, Gauze / Cotton, Needle
  2. Lancet and Lancing Device (Lancing Device) and Test Strip.
  3. Clean and make sure your hands are dry before taking samples to avoid being contaminated.
  4. Insert the needle stick (lancet) into the lance device. Make sure that the needles you wear are new and sterile. The piercing needle is only used for single use.
  5. Put your fingertips to be punctured. We recommend using different fingertips so as not to cause hardening of the skin. Use middle finger, ring finger or forefinger for sampling. Do not use your little finger or thumb.
  6. Use alcoholic cotton to clean the fingertips that will be punctured to prevent infection.
  7. Pivot the needle into your fingertips. Wipe the first blood out with a cotton swab and let a small circle of blood form on the fingertips. Gently press your finger to make it easier to get out. Do not press too strongly so that the muscle fluid does not mix with the blood sample. This can make the measurement results chaotic.
  8. Paste the test strip tip into the blood circle until it is wetted evenly for the sample. Do not drip blood on the strip and do not stick too hard to the test strip. If the blood sample is adequate then the tool will start measuring (measurement time is visible on the display in the countdown).
  9. Attach the gauze or alcoholic cotton to the punctured finger to stop the bleeding.

How to Read Blood Check Results
To read the blood sugar check results you do not need any trouble because the blood sugar check tool will display the results in digital numbers. See the measurements in your blood meter. However, if the number of measurement results is very high or very low, you may need to repeat the measurement to be sure. Whether your steps are correct or your blood meter is inaccurate. After knowing the results of blood sugar test, you can compare it with normal blood sugar levels below.

Fasting Blood Sugar Level
When fasting, sugar or glucose intake into the body is certainly different from ordinary days. Here’s the normal blood sugar level when fasting:
4 – 7 mmol/l or 72 – 126 mg/dl

Normal Blood Sugar Levels
Blood sugar levels may vary depending on when we measure them, the following two times are recommended to check your blood sugar while not fasting:
– 90 minutes after meal: 10 mmol / l or 180 mg / dl
– Night: 8 mmol / l or 144 mg / dl

Hopefully the information we provide can be useful and please share it to your loved ones so they can control their blood sugar levels.more information about price diabetic lancets please visit

Leave a Reply

Your email address will not be published. Required fields are marked *